Ordering & Info
Reseller Finder
My Support Tickets
Submit Question
My Cart
KBS Coatings Support Desk
Use the search or browse by category
General Topics
Do you have any suggestions for getting my can of paint open and storing it for future use?
How long does it take to ship out my order once I place an order?
Does KBS Coating Ship To Canada?
and 4 more ...
KBS Klean
My tank has an internal fuel pump and fuel strainer assembly consisting of a mix of plastic and metal parts. Is it safe to use KBS Klean on these parts?
Is KBS Klean suitable for use prior to spraying automotive paint?
Can I use your KBS Klean in our parts washer?
RustBlast
Will my cured undercoating be affected by RustBlast while treating the bare metal?
Is RustBlast safe if it is gets on wiring, rubber, etc. during the process of using it on a car chassis?
If I sandblast the surface, can I or should I still do the RustBlast application?
and 1 more ...
RustSeal
Can I top coat RustSeal?
How much RustSeal would be needed to coat a standard car chassis (frame and underbody carriage)?
Can I use lacquer thinner to thin RustSeal for spraying?
and 1 more ...
Tank Sealer
Can I use the Tank Sealer on a new tank?
If I have a previous coating in my tank, should I remove it first before sealing up the tank with your tank sealing system?
I have a new tank. Can I just use the Tank Sealer?
and 1 more ...
DiamondFinish Clear
Do the Brush Mark Really Flow Out When Brushing DiamondFinish Clear?
Should DiamondFinish Clear be thinned for spraying? With what do you thin DiamondFinish Clear?
How do I speed up the curing of DiamondFinish Clear?
and 8 more ...
BlackTop
What type of a brush should be used to brush BlackTop for a smooth finish?
Can I brush on the BlackTop paint or does it have to be sprayed?
KBS Top Coater
I would like a brush on top coat. Does KBS Top Coater brush out well?
KBS Top Coater Aerosol
Is KBS Top Coater Aerosol compatible with DiamondFinish Clear Aerosol?
Motor Coater
I will be coating my marine engine with Motor Coater, but have some rust spots on the iron die-cast manifold. How would you recommend I prepare this spot before applying the Motor Coater Engine Paint?
XTC
If I paint Harley Sportster exhaust headers with the XTC Primer and XTC paint, will it be okay to do an exhaust wrap after the paint is properly cured?
May I use XTC xtreme coating on mufflers with light rust?
KBS Bed Liner
Is a gallon of KBS Bed Liner enough to coat an entire bed of a truck?
Cavity Coater
Can I apply Cavity Coater into the back side of the fuse and relay panels under the hood to prevent moisture from causing corrosion in the connections?
Can I reuse the Cavity Wand or is the Cavity Wand a single use item?
KBS Strip
Will KBS Strip remove powder coat finishes?
KBS UnderCoat
Does KBS UnderCoat provide any sound deadening?