NuMetal - Epoxy Putty

Yes, you can apply NuMetal Epoxy Putty over cured RustSeal (24 hours) by scuffing up the RustSeal with 320 grit (or similar) and then applying the NuMetal Epoxy Putty.

PRO TIP: Sealing up a metal surface first with RustSeal before applying NuMetal is a great idea, so rust does not form below the NuMetal and potentially cause it to pop off.

Please read the complete NuMetal Application Directions before you begin your project.

NuMetal Epoxy Putty is good for at least two years when Part A and Part B are unmixed and kept in a sealed plastic bag apart from each other.

PRO TIP: You can always warm up the NuMetal Epoxy Putty or add some water if NuMetal becomes difficult to kneed.

Please read the complete NuMetal Application Directions before you begin your project.

Yes, NuMetal Epoxy Putty is proudly Made In The USA. At KBS Coatings, we make our products in Northwest Indiana and source raw materials as much as is possible from companies in the USA.

Please read the complete NuMetal Application Directions before you begin your project.