Cavity Coater

Yes, Cavity Coater is applied with an autobody undercoating type spray gun like the KBS Schutz Underseal Spray Gun with a KBS 48” 360° Spray Wand. Cavity Coater contents may be poured into a clean container pot which fits your applicator gun. Apply a uniform coating of Cavity Coater to interior surfaces. For optimum protection, a 1 mil dry film is recommended. Varying air pressure and wand speed through cavity area will aid in determining coverage. Typically move at one foot per second.

Please read the Cavity Coater Directions before you start your project.

Yes, Cavity Coater is ideal for internal cavities that are rusty. Cavity Coater will stop the rust and prevent it from getting any worse by isolating the cavity surface from the elements.

Please read the Cavity Coater Directions before you start your project.

Yes, absolutely. You can spray the back sides of fuses and relays with Cavity Coater to prevent corrosion which commonly happens under the hood. That is an ideal application.

Please read the Cavity Coater Directions before you start your project.

You can reuse the Cavity Wand almost indefinitely.

After each use, simply flush residual Cavity Coater from the Cavity Wand by inverting the Cavity Coater Aerosol can and spraying for 10 seconds to flush Cavity Wand. If you do this, the Cavity Wand will be ready to use the next time it is needed.

Please be sure to read thoroughly the Cavity Coater Directions before you get started and let us know if you have any questions.