Yes, DiamondFinish Clear is specifically formulated for Direct To Metal (DTM) applications. It adheres perfectly to both ferrous and non-ferrous metals, making it an excellent choice for automotive, marine, and industrial metal surfaces.
✔ DTM Compatible Metals DiamondFinish Clear bonds to ferrous metals (steel, iron) and non-ferrous metals (aluminum, brass, copper) without the need for a separate primer when the surface is properly prepared. |
For best results on bare metal, ensure the surface is clean, dry, and free of rust or contaminants before application. Use KBS Klean to degrease and RustBlast to etch and neutralize bare metal for maximum adhesion.
💡 Pro Tip For the most durable finish on bare metal, apply RustSeal as a primer coat first. DiamondFinish Clear applied over RustSeal creates a rock-hard, chemical-resistant finish with superior long-term protection. |
Ready to Get Started? View full application directions or shop DiamondFinish Clear today. |