Yes, DiamondFinish Clear can be used on carbon fiber. Follow the surface prep steps below before applying.
⚙ Surface Prep — Carbon Fiber Step 1: Clean the surface with KBS Klean diluted 10 parts warm water to 1 part KBS Klean. Step 2: Scuff the surface with 600–1200 grit sandpaper. Step 3: Repeat the cleaning process with KBS Klean. Step 4: Rinse thoroughly and allow to completely dry before applying DiamondFinish Clear. |
⚠ Pro Tip — Coat Application Always apply DiamondFinish Clear in thin coats — never heavy coats. Heavy application can lead to runs, cloudiness, or extended cure times. |
Review the full application directions before you begin your project.
Ready to Get Started? Review the application directions, then pick up everything you need below. Application Directions Shop DiamondFinish Clear Shop KBS Klean |